Raquel Raso

@article{raso_aqueous_2023,

title = {Aqueous phase hydrogenolysis of glycerol with in situ generated hydrogen over Ni/Al3Fe1 catalyst: effect of the calcination temperature},

author = {Raquel Raso and Alejandro Lete and Lucía García and Joaquín Ruiz and Miriam Oliva and Jesús Arauzo},

url = {https://pubs.rsc.org/en/content/articlelanding/2023/ra/d2ra07929a},

doi = {10.1039/D2RA07929A},

issn = {2046-2069},

year  = {2023},

date = {2023-02-01},

urldate = {2023-02-01},

journal = {RSC Advances},

volume = {13},

number = {8},

pages = {5483–5495},

abstract = {The present work studied the influence of the calcination temperature on the aqueous phase hydrogenolysis of glycerol with in situ generated hydrogen over a Ni/Al3Fe1 catalyst. The Ni/Al3Fe1 catalyst was synthesized by the co-precipitation method at 28 mol% of Ni (Ni/(Ni + Al + Fe)) and a molar ratio of Al/Fe of 3/1. The prepared catalyst was calcined at different temperatures (500–750 °C). The obtained samples were tested for the aqueous phase hydrogenolysis (APH) of glycerol and characterized by several analytical techniques (ICP-OES, H2-TPR, XRD, N2-physisorption, NH3-TPD, STEM, FESEM, and TGA). The catalyst calcined at 625 °C was selected as the best sample due to its high acidity, metal dispersion, and catalytic activity; 1,2-propanediol was the highest carbon selectivity product. In addition, it experienced lower metal leaching than the catalyst calcined at 500 °C.},

note = {Publisher: The Royal Society of Chemistry},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{Raso2021,

title = {Aqueous phase hydrogenolysis of glycerol over Ni/Al-Fe catalysts without external hydrogen addition},

author = {Raquel Raso and Lucía García and Joaquín Ruiz and Miriam Oliva and Jesús Arauzo},

doi = {10.1016/j.apcatb.2020.119598},

issn = {09263373},

year  = {2021},

date = {2021-04-01},

journal = {Applied Catalysis B: Environmental},

volume = {283},

pages = {119598},

publisher = {Elsevier B.V.},

abstract = {The present work studied the aqueous phase hydrogenolysis (APH) of glycerol (a by-product of biodiesel manufacturing) without external hydrogen addition to produce value-added products. A series of catalysts based on 28 molar % of Ni were prepared through co-precipitation by changing the Al/Fe molar ratio. The calcined and used catalysts were characterized by several techniques (ICP-OES, N2-physisorption, XRD, H2-TPR, NH3-TPD, FESEM and STEM). This work examines the effects of the molar ratio of Al/Fe on the physicochemical characteristics of Ni/Al-Fe catalysts and during the APH of glycerol. All the catalysts showed low carbon yields to gases and high carbon yields to liquid products, mainly 1,2-propanediol, acetol and ethylene glycol. Ni/Al3Fe1 catalyst gave the best performance in the APH of glycerol: the highest glycerol conversion (42.31 %), carbon yield to gases (6.57 %) and carbon yield to liquids (30.45%). 1,2-propanediol was the liquid product with the highest carbon selectivity (70.89%).},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{raso_zeolite_2021,

title = {Zeolite membranes: Comparison in the separation of H2O/H2/CO2 mixtures and test of a reactor for CO2 hydrogenation to methanol},

author = {Raquel Raso and M. Tovar and Javier Lasobras and Javier Herguido and I. Kumakiri and S. Araki and Miguel Menéndez},

url = {https://www.sciencedirect.com/science/article/pii/S0920586120301310},

doi = {10.1016/j.cattod.2020.03.014},

issn = {0920-5861},

year  = {2021},

date = {2021-03-01},

urldate = {2021-03-01},

journal = {Catalysis Today},

volume = {364},

pages = {270–275},

series = {Special Issue on the 14th International Conference on Catalysis in Membrane Reactors},

abstract = {A zeolite membrane reactor can be employed for hydrogenation of CO2 to methanol. The removal of water from the reaction environment would increase the reaction rate and the achievable conversion. The separation of water from mixtures containing CO2, hydrogen and water at suitable temperatures for this reaction was tested with several zeolite membranes (zeolite A, mordenite, zeolite T, chabazite and Ti-Chabazite). Zeolite A provided the best H2O/H2 separation factor. Preliminary experiments comparing a traditional reactor and the combination of a traditional reactor with a membrane reactor show that the yield of methanol was improved, in one case being higher than the limit corresponding to the thermodynamic equilibrium in a conventional reactor.},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{Raso2020,

title = {Study of Ni/Al-Fe Catalyst Stability in the Aqueous Phase Hydrogenolysis of Glycerol},

author = {Raquel Raso and Lucia García and Joaquín Ruiz and Miriam Oliva and Jesús Arauzo},

url = {https://www.mdpi.com/2073-4344/10/12/1482/htm https://www.mdpi.com/2073-4344/10/12/1482},

doi = {10.3390/CATAL10121482},

issn = {2073-4344},

year  = {2020},

date = {2020-12-01},

journal = {Catalysts 2020, Vol. 10, Page 1482},

volume = {10},

number = {12},

pages = {1482},

publisher = {Multidisciplinary Digital Publishing Institute},

abstract = {The present work studied the stability and reusability of Ni/Al-Fe catalyst in the aqueous phase hydrogenolysis of glycerol without external hydrogen addition. The catalyst based on 28 molar % of Ni with 3/1 molar ratio of Al/Fe was prepared through co-precipitation. This catalyst presented the best performance in our last study which compares several Ni/Al-Fe catalysts with different molar ratios of Al/Fe. To see the influence of the pressurized water on the physicochemical characteristics of Ni/Al-Fe catalyst, a test of up to 9 h has been carried out. Fresh and used catalysts were characterized by various techniques: X-ray Diffraction (XRD), N2-physisorption, field emission scanning electron microscopy (FESEM) and STEM. Glycerol conversion and carbon yield to gases and liquids did not vary significantly when compared at 3 h and 9 h. Furthermore, the morphology of the catalyst remains stable after continuous recycling under severe hydrothermal conditions. The nickel rich phase of the catalyst, which was determined by XRD and scanning transmission electron microscopy (STEM) techniques, showed a stable size after 9 h under reaction.},

keywords = {},

pubstate = {published},

tppubtype = {article}

}